| Decision by the Joint Committee (Electric Decision) |
01 May 26 |
|
Designation of TPEs
|
|
|
- Korean Standards Association
|
|
|
- Ampere for Renewable Energy
|
|
|
- PT Superintending Company of Indonesia
|
|
| Decision by the Joint Committee (Electric Decision) |
23 Dec 25 |
|
Designation of TPEs
|
|
|
- Galaxy Certification Services Private Limited
|
|
|
- 4K Earth Science Private Limited
|
|
| Decision by the Joint Committee (Electric Decision) |
02 Dec 25 |
|
Decision of no objection to the planned projects:
|
|
|
- ID_PIN007 “Introduction of 3.6MW Solar Power and 15MWh Storage Battery to Beverage Plant”
|
|
|
- ID_PIN008 “Reduction of CO2 emissions from textile dyeing processes through the use of highly efficient
dyeing technology. (Sragen, Central Java)”
|
|
| Decision by the Joint Committee (Electric Decision) |
31 Jul 25 |
|
Decision on a planned project
|
|
|
- ID_PIN006 “Renewable Natural Gas Generation Project from Cow Manure in West Java”
|
|
|
Designation of TPEs
|
|
|
- Ampere for Renewable Energy (*for additional sectoral scopes of 2, 4, 6, and 7.)
|
|
|
- PT CBQA GLOBAL INDONESIA
|
|
|
- EcoLance Private Limited
|
|
| Decision by the Joint Committee (Electric Decision) |
30 Apr 25 |
|
Decision of no objection to the planned projects:
|
|
|
- ID_PIN003 “Introduction of 2.7MW Solar Power System to Steel Wire Products Factory”
|
|
|
- ID_PIN004 “Introduction of 0.7MW Rooftop Solar Power System to Automotive Parts Factory”
|
|
|
- ID_PIN005 "Re-design and Optimization of Bus Routes and Schedules by Transportation Data Analysis in
BSD City"
|
|
| Decision by the Joint Committee (Electronic Decision) |
07 Jan 25 |
|
Decision on no objection to the planned projects:
|
|
|
- ID_PIN001 “Introduction of 1.5MW Rooftop Solar Power System to Food Factory and Automotive Parts Factory”
|
|
|
- ID_PIN002 “Energy-saving Project in the Automotive Glass Manufacturing Process”
|
|
| 10th Joint Committee in Jakarta |
18 Dec 24 |
|
Meeting Report
|
|
|
Annex 1: Rules of
Implementation for the JCM (ver03.0)
|
|
|
Annex 2: Joint
Crediting Mechanism Glossary of Terms (ver03.0)
|
|
|
Annex 3:
Common Specifications of the JCM Registry (ver02.0)
|
|
|
Annex 4: Joint Crediting
Mechanism Project Cycle Procedure (ver06.0)
|
|
|
Annex 4.1: Project Idea Note
for JCM Project (ver01.0)
|
|
|
Annex 4.2: JCM
Modalities of Communication Statement Form (ver02.0)
|
|
|
Annex 4.3: JCM
Assessment of Reference Emissions Request Form (ver01.0)
|
|
|
Annex 4.4: JCM
Validation Report Form (ver02.0)
|
|
|
Annex 4.5: JCM Credit
Allocation Form (ver01.0)
|
|
|
Annex 4.6: JCM
Project Registration Request Form (ver02.0)
|
|
|
Annex 4.7: JCM Project
Implementation Report Form (ver01.0)
|
|
|
Annex 4.8: JCM
Verification Report Form (ver02.0)
|
|
|
Annex 4.9: JCM
Credits Issuance Request Form (ver04.0)
|
|
|
Annex 4.10: JCM Renewal
of Crediting Period Request Form (ver01.0)
|
|
|
Annex 4.11: JCM
Post-Registration Changes Request Form (ver02.0)
|
|
|
Annex 4.12: JCM
Project Withdrawal Request Form (ver02.0)
|
|
|
Annex 4.13: JCM
Registration Request Withdrawal Form (ver02.0)
|
|
|
Annex 4.14: JCM
Issuance Request Withdrawal Form (ver02.0)
|
|
|
Annex 5: Joint
Crediting Mechanism Guidelines for Developing Proposed Methodology (ver03.0)
|
|
|
Annex 6: Joint
Crediting Mechanism Guidelines for Developing Project Design Document and Monitoring Report (ver04.0)
|
|
|
Annex 7: Joint
Crediting Mechanism Guidelines for Developing Sustainable Development Implementation Plan and Report
(ver02.0)
|
|
|
Annex 8: Joint
Crediting Mechanism Guidelines for Designation as a Third-Party Entity (ver04.0)
|
|
|
Annex 9: Joint
Crediting Mechanism Guidelines for Validation and Verification (ver02.0)
|
|
|
Annex 10: Joint
Crediting Mechanism Rules of Procedures for the Joint Committee (ver03.0)
|
|
|
Annex 10.1: Conflict of
Interest Declaration Form (ver01.0)
|
|
|
Annex 11: Joint
Crediting Mechanism Guidelines for Developing Proposed Methodology for Carbon Capture and Storage and Carbon
Capture, Utilization and Storage (CCS and CCUS) (ver01.0)
|
|
|
Annex 12: Joint
Crediting Mechanism Guidelines for Developing Project Design Document and Monitoring Report for Carbon
Capture and Storage and Carbon Capture, Utilization and Storage (CCS and CCUS) (ver01.0)
|
|
|
Decision on issuance of credits:
|
|
|
- ID013 “Power generation by waste heat recovery in the PT Semen Indonesia (Persero) Tbk factory in Tuban” for
the monitoring period of 01 Jul 18 – 31 Dec 20
|
|
|
Registration of proposed JCM projects:
|
|
|
- ID025 “Energy Saving for Industrial Park with Smart LED Street Lighting System”
|
|
|
- ID026 “Introduction of LED Lighting to UNIQLO Sales Stores”
|
|
|
- ID027 “10MW Mini Hydro Power Plant Project in North Sumatra”
|
|
|
- ID029 “Energy Saving by Introducing High Efficiency Autoclave to Infusion Manufacturing Factory”
|
|
|
- ID032 “Introduction of CNG-Diesel Hybrid Equipment to Public Bus in Semarang”
|
|
|
- ID033 “4.2MW Rooftop Solar Power Project to Pharmaceutical Factories, Vehicles Dealers, and Timber
Factories”
|
|
|
- ID034 “Energy Saving by Introducing High Efficiency Autoclave to Infusion Manufacturing Factory 2”
|
|
|
- ID035 “Rehabilitation Project of Power Generation System at Karai 7 Mini Hydro Power Plant”
|
|
|
Approval of a proposed methodology:
|
|
|
ID_AM029 (ver01.0)
“Installation of closed drain recovery system and utilization for boiler feed water”
|
|
|
Approval of the revised methodologies:
|
|
|
ID_AM002 (ver03.0)
“Energy Saving by Introduction of High Efficiency Centrifugal Chiller"
|
|
|
ID_AM004 (ver03.0)
“Installation of Inverter-Type Air Conditioning System for Cooling for Grocery Store”
|
|
|
ID_AM005 (ver03.0)
“Installation of LED Lighting for Grocery Store"
|
|
|
ID_AM008 (ver03.0)
“Installation of a separate type fridge-freezer showcase by using natural refrigerant for grocery store to
reduce air conditioning load inside the store"
|
|
|
ID_AM010 (ver02.0)
“Introducing double-bundle modular electric heat pumps to a new building"
|
|
|
ID_AM023 (ver01.1)
“Installation of gas engine cogeneration system with absorption chiller to supply electricity, heating
energy and cooling energy"
|
|
|
Designation of third-party entities:
|
|
|
- LGAI Technological Center S.A. (Applus+ Certification)
|
|
|
- Korean Standards Association
|
|
|
- Enviance Services Private Limited
|
|
|
- Ampere For Renewable Energy
|
|
|
- PT Superintending Company of Indonesia (PT SUCOFINDO) – SBU Sertifikasi dan Eco Framework (Sucofindo
International Certification Services)
|
|
|
- Earthood Services Limited
|
|
| Decision by the Joint Committee (Electronic Decision) |
17 Feb 21 |
|
Approval of proposed methodologies:
|
|
|
ID_AM027 (ver01.0)
"Electricity generation by a biomass power plant"
|
|
|
ID_AM028 (ver01.0)
"Energy saving by introducing waste hot water recovery system to autoclave in infusion manufacturing
process line"
|
|
|
Registration of proposed JCM project:
|
|
|
- ID023 "Installation of Solar Power System and Storage Battery to Commercial Facility"
|
|
|
Decision on interim special measure for on-site assessment by TPEs
|
|
| Decision by the Joint Committee (Electronic Decision) |
23 Dec 20 |
|
Approval of proposed methodologies:
|
|
|
ID_AM025 (ver01.0)
"Installation of all-electric injection molding machine with power regeneration"
|
|
|
ID_AM026 (ver01.0)
"Introduction of CNG-Diesel Hybrid Equipment to Public Buses"
|
|
| Decision by the Joint Committee (Electronic Decision) |
17 Sep 20 |
|
Approval of proposed methodologies:
|
|
|
ID_AM023 (ver01.0)
"Installation of gas engine cogeneration system with absorption chiller to supply electricity, heating
energy and cooling energy"
|
|
|
ID_AM024 (ver01.0)
"Replacement of diffuser with aerator in aeration pond"
|
|
| Decision by the Joint Committee (Electronic Decision) |
30 Mar 20 |
|
Registration of proposed JCM projects:
|
|
|
- ID010 "Energy saving through introduction of Regenerative Burners for aluminum holding furnaces of the
automotive components manufacture in the Republic of Indonesia"
|
|
|
- ID024 “Introduction of Absorption Chiller to Chemical Factory”
|
|
|
Decision on change in designation status of a TPE:
|
|
|
- Lloyd’s Register Quality Assurance Limited (LRQA)
|
|
| Decision by the Joint Committee |
10 Jan 20 |
|
Decision on issuance of credits:
|
|
|
- ID009 “Energy Saving for Air-Conditioning at Shopping Mall with High Efficiency Centrifugal Chiller” for the
monitoring period of 01 Jan 17 – 30 Apr 18
|
|
|
- ID011 “Reduction of Energy Consumption by Introducing an Energy-Efficient Waste Paper Processing System into
a Packaging Paper Factory in Bekasi, West Java” for the monitoring period of 01 Jul 17 – 31 Aug 18
|
|
|
- ID012 “GHG emission reductions through utility facility operation optimization system for refineries in the
Republic of Indonesia” for the monitoring period of 01 Jan 18 – 31 Oct 18
|
|
|
- ID014 “Energy saving by optimum operation at an oil refinery” for the monitoring period of 01 Jan 18 – 31
Dec 18
|
|
|
- ID015 “Reducing GHG emission at textile factories by upgrading to air-saving loom” for the monitoring period
of 01 Jan 17 – 30 Sep 18
|
|
|
- ID016 “Installation of Tribrid System to mobile communication’s Base Transceiver Stations in Republic of
Indonesia” for the monitoring period of 01 Jan 18 – 31 Dec 18
|
|
| 9th Joint Committee in Denpasar |
31 Oct 19 |
|
Meeting Report
|
|
|
Annex 1: ID_AM020
“Introduction of energy efficient and high color rendering LED downlight/spotlight” (version 01.0)
|
|
|
Annex 2: ID_AM021
“Electricity generation by rehabilitation of run-of-river hydro power generation system(s) in Indonesia”
(version 01.0)
|
|
|
Annex 3: ID_AM022
“Introduction of Absorption Chiller” (version 01.0)
|
|
|
Registration of a proposed JCM project:
|
|
|
- ID021 "Introduction of High-efficiency Once-through Boiler in Film Factory"
|
|
| Decision by the Joint Committee (Electronic Decision) |
03 Sep 19 |
|
Registration of proposed JCM projects:
|
|
|
- ID020 "Introduction of High-Efficiency Looms in Weaving Mill"
|
|
|
- ID022 "Introduction of High Efficiency Once-through Boiler in Golf Ball Factory"
|
|
| Decision by the Joint Committee |
18 Jul 19 |
|
Joint Crediting
Mechanism Project Cycle Procedure ver05.1
|
|
| Decision by the Joint Committee (Electronic Decision) |
09 May 19 |
|
Approval of a proposed methodology:
|
|
|
ID_AM019 (ver01.0)
"Electricity generation by installation of run-of-river hydro power generation system(s) in
Indonesia"
|
|
|
Approval of a revised methodology:
|
|
|
ID_AM006 (ver02.1)
"GHG emission reductions through optimization of refinery plant operation in Indonesia"
|
|
|
Registration of proposed JCM project:
|
|
|
- ID019 "Installation of gas engine cogeneration system to supply electricity and heat to the vehicle
manufacturing factory of PT. Toyota Motor Manufacturing Indonesia"
|
|
| Decision by the Joint Committee (Electronic Decision) |
07 Mar 19 |
|
Approval of a proposed methodology:
|
|
|
ID_AM018 (ver01.0)
"Installation of LED Street Lighting with Lighting Control System"
|
|
|
Registration of proposed JCM projects:
|
|
|
- ID017 “Introduction of 0.5MW Solar Power System to Aroma and Food Ingredients Factory”
|
|
|
- ID018 “1.6MW Solar PV Power Plant Project in Jakabaring Sport City”
|
|
|
Designation of a TPE for an additional sectoral scope of 12 for validation and verification:
|
|
|
- EPIC Sustainability Services Private Limited (EPIC)
|
|
| Decision by the Joint Committee |
28 Nov 18 |
|
Approval of a proposed methodology:
|
|
|
ID_AM017 (ver01.0)
"Installation of Solar PV System and Storage Battery System"
|
|
|
Approval of a revised methodology:
|
|
|
ID_AM007 (ver01.1)
"GHG emission reductions through optimization of boiler operation in Indonesia"
|
|
| Decision by the Joint Committee |
24 Oct 18 |
|
Approval of a revised methodology:
|
|
|
ID_AM009 (ver03.0)
“Replacement of conventional burners with regenerative burners for aluminum holding furnaces”
|
|
| Decision by the Joint Committee |
24 Aug 18 |
|
Registration of proposed JCM project:
|
|
|
- ID015 "Reducing GHG emission at textile factories by upgrading to air-saving loom"
|
|
| 8th Joint Committee in Jakarta |
10 Jul 18 |
|
Meeting Report
|
|
|
Annex 1: JCM
Guidelines for Developing Proposed Methodology (version 02.0)
|
|
|
Annex 2: JCM
Guidelines for Developing Project Design Document and Monitoring Report (version 03.0)
|
|
|
Annex 3: JCM
Verification Report Form (version 01.1)
|
|
|
Annex 4: ID_AM015 “Energy
Saving by Introduction of High Efficiency Once-through Boiler” (version 01.0)
|
|
|
Annex 5: ID_AM016
“Installation of gas engine cogeneration system to supply electricity and heat to facility” (version
01.0)
|
|
|
Registration of proposed JCM projects:
|
|
|
- ID012 “GHG emission reductions through utility facility operation optimization system for refineries in the
Republic of Indonesia”
|
|
|
- ID013 “Power generation by waste heat recovery in the PT Semen Indonesia (Persero) Tbk factory in Tuban”
|
|
|
- ID014 “Energy saving by optimum operation at an oil refinery”
|
|
|
- ID016 “Installation of Tribrid System to mobile communication’s Base Transceiver Stations in Republic of
Indonesia”
|
|
|
Decision on issuance of credits
|
|
|
- ID001 “Energy Saving for Air-Conditioning and Process Cooling by Introducing High-efficiency Centrifugal
Chiller” for the monitoring period of 1 March 14 - 31 July 15
|
|
|
- ID004 “Energy Saving for Air-Conditioning at Textile Factory by Introducing High-efficiency Centrifugal
Chiller in Karawang West Java” for the monitoring period of 20 Dec 14 - 31 May 16
|
|
|
- ID005 “Energy Saving for Air-Conditioning at Textile Factory by Introducing High-efficiency Centrifugal
Chiller in Batang, Central Java (Phase 2)” for the monitoring period of 01 Apr 15 - 31 May 16
|
|
|
- ID006 “Installation of Inverter-type Air Conditioning System, LED Lighting and Separate Type Fridge Freezer
Showcase to Grocery Stores in Republic of Indonesia” for the monitoring period of 01 Mar 14 - 31 May 16
|
|
| Decision by the Joint Committee |
22 Dec 17 |
|
Registration of proposed JCM project:
|
|
|
- ID011 "Reduction of Energy Consumption by Introducing an Energy-Efficient Waste Paper Processing System
into a Packaging Paper Factory in Bekasi, West Java"
|
|
| 7th Joint Committee in Tangerang Selatan |
04 Dec 17 |
|
Meeting report
|
|
|
Annex 1: Rules of
Implementation for the Joint Crediting Mechanism (version 02.2)
|
|
|
Annex 2: ID_AM006 “GHG
emission reductions through optimization of refinery plant" (version 02.0)
|
|
|
Annex 3: ID_AM013
“Installation of Solar PV System” (version 01.0)
|
|
|
Annex 4: ID_AM014
“Installation of Tribrid Systems to mobile communication’s Base" (version 01.0)
|
|
|
Registration of proposed JCM projects:
|
|
|
- ID009 "Energy Saving for Air-Conditioning at Shopping Mall with High Efficiency Centrifugal
Chiller"
|
|
| Decision by the Joint Committee (Electronic Decision) |
21 Sep 17 |
|
Designation of a TPE for additional sectoral scopes of 1, 2 and 3 for verification
|
|
|
- Japan Management Association
|
|
| Decision by the Joint Committee |
19 Jul 17 |
|
JCM Credits
Issuance Request Form ver03.1
|
|
| Decision by the Joint Committee |
10 May 17 |
|
Rules of Implementation
for the Joint Crediting Mechanism (JCM) ver02.1
|
|
|
Joint Crediting
Mechanism Guidelines for Developing Proposed Methodology ver01.1
|
|
|
Joint Crediting
Mechanism Guidelines for Developing Project Design Document and Monitoring Report ver02.1
|
|
|
Joint Crediting
Mechanism Guidelines for Designation of a Third-Party Entity ver03.1
|
|
| 6th Joint Committee in Tokyo |
09 Feb 17 |
|
Meeting report
|
|
|
Annex 1:Joint Crediting
Mechanism Project Cycle Procedure (version 05.0)
|
|
|
Annex 2:JCM
Credits Issuance Request Form (version 03.0)
|
|
|
Annex 3:ID_AM011
“Installation of energy saving air jet loom at textile factory (version 01.0)”
|
|
|
Annex 4:ID_AM009
“Replacement of conventional burners with regenerative burners for aluminum holding furnaces (version
02.0)”
|
|
|
Annex 5:ID_AM012 “Reduction
of Energy Consumption by Introducing an Energy-Efficient Old Corrugated Carton Processing System into a
Cardboard Factory (version 01.0)”
|
|
|
Registration of proposed JCM projects:
|
|
|
- ID008 "Introducing double-bundle modular electric heat pumps at AXIA SOUTH CIKARANG Tower 2"
|
|
| Decision by the Joint Committee (Electronic Decision) |
03 Jun 16 |
|
Registration of proposed JCM project:
|
|
|
- ID006 " Installation of Inverter-type Air Conditioning System, LED Lighting and Separate Type Fridge
Freezer Showcase to Grocery Stores in Republic of Indonesia"
|
|
| Decision by the Joint Committee (Electronic Decision) |
16 May 16 |
|
Designation of third-party entities:
|
|
|
- PT TUV Rheinland Indonesia
|
|
| Decision by the Joint Committee (Electronic Decision) |
12 May 16 |
|
Decision on issuance of credits
|
|
|
- ID002 "Project of Introducing High Efficiency Refrigerator to a Food Industry Cold Storage in
Indonesia" for the monitoring period of 2 February 15 - 31 July 15
|
|
|
- ID003 "Project of Introducing High Efficiency Refrigerator to a Frozen Food Processing Plant in
Indonesia" for the monitoring period of 2 February 15 - 31 July 15
|
|
| Decision by the Joint Committee |
14 Apr 16 |
|
Rules of Implementation
for the Joint Crediting Mechanism (JCM) ver02.0
|
|
|
Joint Crediting
Mechanism Project Cycle Procedure ver04.0
|
|
|
JCM Credits
Issuance Request Form ver02.0
|
|
| Decision by the Joint Committee (Electronic Decision) |
24 Mar 16 |
|
Registration of proposed JCM projects:
|
|
|
- ID004 "Energy Saving for Air-Conditioning at Textile Factory by Introducing High-efficiency Centrifugal
Chiller in Karawang, West Java"
|
|
|
- ID005 "Energy Saving for Air-Conditioning at Textile Factory by Introducing High-efficiency Centrifugal
Chiller in Batang, Central Java (Phase 2)"
|
|
| Decision by the Joint Committee (Electronic Decision) |
10 Nov 15 |
|
Approval of the revised methodologies:
|
|
|
ID_AM002 (ver02.0)
“Energy Saving by Introduction of High Efficiency Centrifugal Chiller”
|
|
|
ID_AM003 (ver02.0)
“Installation of Energy-efficient Refrigerators Using Natural Refrigerant at Food Industry Cold Storage and
Frozen Food Processing Plant”
|
|
|
ID_AM004 (ver02.0)
“Installation of Inverter-Type Air Conditioning System for Cooling for Grocery Store”
|
|
|
ID_AM005 (ver02.0)
“Installation of LED Lighting for Grocery Store”
|
|
|
ID_AM008 (ver02.0)
“Installation of a separate type fridge-freezer showcase by using natural refrigerant for grocery store to
reduce air conditioning load inside the store”
|
|
| 5th Joint Committee in Tangerang Selatan |
09 Nov 15 |
|
Meeting report
|
|
|
Annex 1: Joint Crediting
Mechanism Project Cycle Procedure (version 03.0)
|
|
|
Annex 2: Joint
Crediting Mechanism Guidelines for Developing Sustainable Development Implementation Plan and Report
(version 01.0)
|
|
|
Annex 3: Common
Specifications of the JCM Registry (version 01.0)
|
|
| Decision by the Joint Committee (Electronic Decision) |
29 Sep 15 |
|
Designation of third-party entities:
|
|
|
- ERM Certification and Verification Services Limited
|
|
| Decision by the Joint Committee (Electronic Decision) |
06 Aug 15 |
|
Approval of proposed methodologies with revisions:
|
|
|
ID_AM009 “Replacement of
conventional burners with regenerative burners for aluminum holding furnaces”
|
|
|
ID_AM010 “Introducing
double-bundle modular electric heat pumps to a new building”
|
|
| 4th Joint Committee in Tangerang Selatan |
18 May 15 |
|
Meeting report
|
|
|
Annex 1: ID_AM006 “GHG
emission reductions through optimization of refinery plant operation in Indonesia”
|
|
|
Annex 2: ID_AM007 “GHG
emission reductions through optimization of boiler operation in Indonesia”
|
|
|
Annex 3: ID_AM008
“Installation of a separate type fridge-freezer showcase by using natural refrigerant for grocery store to
reduce air conditioning load inside the store”
|
|
| Decision by the Joint Committee (Electronic Decision) |
14 May 15 |
|
Approval of a proposed methodology with revisions:
|
|
|
ID_AM005 “Installation of
LED Lighting for Grocery Store”
|
|
|
Provisional designation of third-party entities (TPEs)
|
|
|
- PT. MUTUAGUNG LESTARI
|
|
| Decision by the Joint Committee (Electronic Decision) |
26 Apr 15 |
|
Joint Crediting
Mechanism Rules of Procedures for the Joint Committee ver02.0
|
|
|
Designation of third-party entities:
|
|
|
- KBS Certification Services Pvt. Ltd.
|
|
| Decision by the Joint Committee (Electronic Decision) |
29 Mar 15 |
|
Registration of proposed JCM projects:
|
|
|
-ID002 "Project of Introducing High Efficiency Refrigerator to a Food Industry Cold Storage in
Indonesia"
|
|
|
-ID003 "Project of Introducing High Efficiency Refrigerator to a Frozen Food Processing Plant in
Indonesia"
|
|
| Decision by the Joint Committee (Electronic Decision) |
05 Jan 15 |
|
Designation of third-party entities:
|
|
|
-EPIC Sustainability Services Private Limited (EPIC)
|
|
| 3rd Joint Committee in Bogor |
30 Oct 14 |
|
Meeting report
|
|
|
Annex 1: Joint Crediting
Mechanism Project Cycle Procedure (version 02.0)
|
|
|
Annex 2: Joint
Crediting Mechanism Guidelines for Designation of a Third-Party Entity (version 03.0)
|
|
|
Annex 3: Joint
Crediting Mechanism Guidelines for Developing Project Design Document and Monitoring Report (version
02.0)
|
|
|
Annex 4: Joint
Crediting Mechanism Glossary of Terms (version 02.0)
|
|
|
Annex 5: ID_AM003
“Installation of Energy-efficient Refrigerators Using Natural Refrigerant at Food Industry Cold Storage and
Frozen Food Processing Plant”
|
|
|
Annex 6: ID_AM004
“Installation of Inverter-Type Air Conditioning System for Cooling for Grocery Store”
|
|
|
Designation of third-party entities:
|
|
|
-TUV Rheinland (China) Ltd
|
|
|
Registration of proposed JCM projects:
|
|
|
-ID001 "Energy Saving for Air-Conditioning and Process Cooling by Introducing High-efficiency Centrifugal
Chiller"
|
|
| Decision by the Joint Committee (Electronic Decision) |
17 Sep 14 |
|
Approval of a proposed methodology with revisions:
|
|
|
ID_AM002 “Energy Saving by
Introduction of High Efficiency Centrifugal Chiller”
|
|
| 2nd Joint Committee in Jakarta |
19 May 14 |
|
Meeting report
|
|
|
Annex 1: ID_AM001 “Power
Generation by Waste Heat Recovery in Cement Industry”
|
|
|
Annex 2: Joint
Crediting Mechanism Guidelines for Designation of a Third-Party Entity (version 02.0)
|
|
|
Designation of third-party entities:
|
|
|
- Japan Consulting Institute
|
|
|
- Lloyd’s Register Quality Assurance Limited
|
|
|
- Japan Quality Assurance Organization
|
|
|
- JACO CDM., LTD
|
|
|
- Japan Management Association
|
|
|
- TÜV SÜD South Asia Private Limited
|
|
|
- Deloitte Tohmatsu Evaluation and Certification Organization Co., Ltd
|
|
| 1st Joint Committee in Jakarta |
16 Oct 13 |
|
Meeting report
|
|
|
Annex 1: Joint Crediting
Mechanism Rules of Procedures for the Joint Committee
|
|
|
Annex 2: Rules of
Implementation for the Joint Crediting Mechanism (JCM)
|
|
|
Annex 3: Joint Crediting
Mechanism Project Cycle Procedure
|
|
|
Annex 3.1. JCM Modalities of
Communication Statement Form
|
|
|
Annex 3.2. JCM
Validation Report Form
|
|
|
Annex 3.3. JCM Project
Registration Request Form
|
|
|
Annex 3.4. JCM
Verification Report Form
|
|
|
Annex 3.5. JCM Credits
Issuance Request Form
|
|
|
Annex 3.6. JCM Approved
Methodology Revision Request Form
|
|
|
Annex 3.7. JCM
Post-Registration Changes Request Form
|
|
|
Annex 3.8. JCM Project
Withdrawal Request Form
|
|
|
Annex 3.9. JCM
Registration Request Withdrawal Form
|
|
|
Annex 3.10. JCM Issuance
Request Withdrawal Form
|
|
|
Annex 4: Joint Crediting
Mechanism Guidelines for Developing Proposed Methodology
|
|
|
Annex 5: Joint Crediting
Mechanism Guidelines for Developing Project Design Document and Monitoring Report
|
|
|
Annex 6: Joint Crediting
Mechanism Guidelines for Designation of a Third-Party Entity
|
|
|
Annex 7: Joint Crediting
Mechanism Guidelines for Validation and Verification
|
|
|
Annex 8: Joint Crediting
Mechanism Glossary of Terms
|
|
JCM Registry System